Comfort Grip Grab Bars
What’s in a strong, comfortable grab bar? Comfort Grip Grab Bars have a thick-walled aluminum core surrounded by a white, blue, or gray cover that remains warm to the touch even when wet, and, due to its fluting, provides excellent “gripability” to ensure peace of mind and steadfast confidence.
Fluting consists of slim ridges and grooves, which fit the hand very well and naturally anchor a person’s grip. Water quickly runs off the ridges, leaving a mostly dry surface for a safer, more secure handhold.
Comfort Grip Grab Bars are available in all the customary straight lengths, two popular angled models, and two versatile kits for alcove and corner shower applications (and each kit is expandable with the addition of Extension Bar Kits). All models conform to ADA requirements.
- 419 lb. static load capacity when properly mounted
- Aluminum core surrounded by a fluted, UPVC cover
- Fluting provides a very grippable surface, even when wet
- 1¼" dia. grips
- 1½" distance between grips and wall
- Water sheds from the ridges to give hands a dry, textured surface to hold
- Escutcheons cover all fasteners
- Meets all ADA standards
- Color options permit bars to blend in or offer high contrast to surrounding decor
Please see product specification sheets for details.
Colors: Straight grab bars are available in white, gray and blue; angled grab bars are available in white and blue; Alcove, Corner, and Extension Grab Bar Kits are available in white.
Composition: Aluminum core, UPVC grip cover and brackets.
Diameter of grip area: 1¼″
Distance from wall to grab bar: 1½″
Load capacity: 419 lbs. (grab bars must be properly fastened to blocking that is securely installed in or on the wall).
Fastener requirements: Grab bars must be mounted to substantial, well-secured blocking, usually of 2x solid wood (toenailing is not sufficient; use cleats or notch blocking into studs), though brick, concrete, or concrete block can also be suitable mounting materials; use #10 round head fasteners or hex head fasteners (do not use flat head type fasteners); use stainless steel fasteners in wet area installations; each fastener must be capable of withstanding 77 lbs. of pull-out force; the length of fasteners will depend on the distance to drive them deeply into an appropriately reinforced mounting material capable of supporting the load; drive a properly sized fastener into every mounting plate pilot hole to achieve the full load rating.
Notes: Recommended for interior installations only; made of 100% recyclable materials.
What You'll Need
- Comfort Grip grab bar
- fasteners for installing the bar (use #10 round head or hex head fasteners in a length appropriate for the wall and blocking materials)
- 2× lumber for blocking in wall
- power drill
- measuring tape
Where should I put grab bars in a shower?
Usually two or three grab bars are installed in a shower, though the number and location can depend on the size of the shower. Generally, if you stand facing the direction of the shower head, one grab bar is installed vertically on that wall so it can be easily reached with one hand. Another grab bar is often installed horizontally on the adjacent wall to the left or right of the shower head wall. Many showers are equipped with a second, vertical grab bar on the adjacent wall, as well. Instead of two grab bars on the adjacent wall you can choose an ‘L’ shaped bar or a 135° angled grab bar to accomplish the same coverage.
Another popular option is to install a grab bar-rated support for your shower hand wand. Be sure you specify one that is rated as a grab bar and install it as such.
Are there standard heights for installing a grab bar next to a toilet?
ADA guidelines call for installation of grab bars near toilets at 33″ to 36″ above the finished floor.
Why can’t I use a towel bar as a grab bar?
Towel bars are simply not stong enough to carry the load or force of someone in need of real support. They may appear to be helpful during “normal” use when a little balance assistance is needed, but as soon as any real weight or force is applied a towel bar just can’t support the demands put on it. Plus, towel bars are usually mounted with small screws in plastic drywall anchors, ill-suited for the demands expected of a grab bar.
What makes comfort grip grab bars better than others?
This often comes down to preference, though we believe our grab bars offer several key advantages.
Our grab bars are warm to the touch and provide a very “grippable” surface. Users with weakness in their hands or forearms find these grab bars easy to hold, even when wet. Grooves in the UPVC cover collect water so that the ridges remain drier, thereby providing a good foundation for holding. The core of every grab bar is a thick-walled aluminum tube that offers great strength and will not rust or deteriorate.
By contrast, stainless steel grab bars feel cold to the touch and can be slippery when wet, even if textured. The quality of stainless steel in grab bars varies, and the appearance of some inferior products will decline over time. And stainless steel grab bars are so common in public restrooms and commercial settings that people think they look institutional.
Do comfort grip grab bars meet ADA requirements?
Yes they do. There are a couple of key measurements that ADA requires of the grab bars themselves. One is the diameter of the grab bar, and the other is the distance between the grab bar and the wall to which it is anchored. The diameter of the grab bar must be between 1¼” and 1½”. The distance from the wall to the grab bar cannot exceed 1½”.
There are many ADA requirements that define the locations and lengths of grab bars for particular situations, though these requirements are for commercial (non-residential) applications. Consulting ADA guidelines before installing grab bars in your home is wise and can be beneficial, though there is no legal obligation to comply with them. Our best recommendation is to visit an online source for details. Here is a link to the ADA Standards for Accessible Design: http://www.ada.gov
How should I install grab bars?
Grab bars must be anchored properly to support a significant load and to withstand sudden force, like what can happen when a person falls and grabs onto a grab bar or falls into a grab bar with their body.
There are a number of ways to provide a good foundation for installing grab bars. You can install 2x blocking between studs in the wall (then cover with materials like drywall and tile), or secure ⅝″ or ¾” plywood over the studs prior to drywall. Some grab bars can be used with a fastener called a Wing-it, though that is not true for AKW grab bars.
The better you can anchor the blocking, the more force the grab bar will be able to withstand, to a point. So notching the studs for blocking, or installing cleats behind the blocking, provides more foundational strength than simply toe-nailing the blocking to the studs.
Be sure to use fasteners that fully penetrate the blocking or plywood. We suggest using #10 or #12 screws, depending on the mounting plate holes of your grab bars. The length of the screws will vary depending on the wall materials the screws have to penetrate through ½″ drywall before reaching the blocking material, whereas in other situations there may be thick tile and underlayment layers over the blocking, which would require a much longer screw. Cement block and concrete require specialized anchors and screws. Always use stainless steel fasteners in wet locations.
And always use stainless steel fasteners in wet locations.