FastDEK Shower Base – 71” x 35 ½” (Black)

Regular Price $853.00

SKU: 11868

+ Made from compression mold glass-fiber reinforced plastic (GRP) for strength
+ Stone-effect textured surface finish aids slip resistance (no need to tile)
+ Grid design on underside of base ensures it is lightweight yet durable
+ Only 1” thick, can be installed above or within the floor
+ Concealed drain with color and surface matched drain cover

747 853
fastdek-installation-accessories
0
117238
709

Description

FastDEK shower bases are constructed using lightweight yet durable compression mold glass-fiber reinforced plastic (GRP) enabling them to support a maximum capacity of 440lbs, with a stone-effect textured surface that helps to improve drainage and aid with slip-resistance.

At only an inch deep, FastDEK bases can either sit on top of or be built into the floor for low or level access, ensuring access for those in wheelchairs or with limited mobility.

Product Specification:

  • Made from compression molded glass-fiber reinforced plastic (GRP) for reliable strength
  • 440lbs max. capacity when installed on 16″ o.c. joist systems, ideal for wheelchair users
  • 1” thick across base and along perimeter
  • Can be installed above the floor for low-level access, or recessed into it for complete barrier free access to the shower
  • Grid design on base underside ensures rigidity while being lightweight (approx. 50lbs)
  • Install on wooden joists (no need to notch, lower or alter joists), sub-floor, or concrete
  • Drain concealed with surface texture and color matched drain cover
  • 2” drain hole diameter
  • Compatible with standard drain connector
  • 4 pre-sloped gradient planes direct water flow towards drain
  • 1% per foot or greater gradient (varies due to length of pitch)
  • Contemporary, stone-effect surface texture offers superior slip-resistance (no need to tile)
  • Covered by AKW limited lifetime warranty
  • You will need a FastDEK Installation Kit
  • For more details, see Specification Sheet
  • Review installation instructions before beginning your project

Please note: FastDEK shower bases cannot be cut, to do so will void the manufacturer warranty

Specification Sheets

Download Specification Sheet

What you will need

  • level
  • FastDEK Installation Kit
  • may need modified thinset mortar, depending on installation substrate
  • 1/2″ x 1/2″ trowel to spread thinset mortar, if applicable
  • Tank/10 waterproofing compound
  • disposable 3″ wide brush
  • scissors or utility knife
  • if waterproofing a large area, a paint roller with 1/2″ nap cover
  • caulk gun

There are no video tutorials for this product.

There are no FAQs for this product.

Find your nearest ARC distributor

Find ARC bathroom products at 170+ distributors located across the United States & Canada, including a range of national chains and independent merchants.

Learn more

©2024 ARC Inc. All Rights Reserved | Website by Super Digital